【 Weak current College 】 zhuantie; brand projector zeroing method (1)

From the network
NEC (Mar) projector zeroing method
830/840/850/440 series time to appear second indicator light, including the LAMP led, zero out method is standby OFF kin under press 20 seconds or so.

NEC460/660 series zero method: in standby mode, press the help key for 10 seconds
VT47 + in the default option in the menu under Select clear lamp timer, and then press the OK key on OK

SONY (Sony) projector zeroing method
RESES + left + right + OK (for Sony most models), Panel key not enough you can also use the remote control.

SONYP15 projection lamp clear method
In light of State press RESET after you press the left button on the right after the confirmation key to 7 seconds

PLUS (plus) projector zeroing method
Applicable models: PLUSU2-811/U2-815/U2-815C/U2-1110/U2-1130/U2-X1130C/U2-1150. at 1100 hours zero: menu selection to the timing, press ON (about 8 seconds); use 1100 hours, no State, directly press ON (25 seconds).
Applicable models: PLUSU3-810SFC/U3-1080SFC/U3-810WZC/U3-1080WZC/U2-X200UC/4-161/U4-121/V-1080C/V-807C/V-1100C/U2-850/U2-1500/U2-850W/U2-1500W/U5-121/U5-162. menu lamp timer reset

Mitsubishi Projector zeroing method
In the standby power, left, right. At the first one and then power on the system.
LUXEON (lixun) projector zeroing method
Generally in the menu. Some models also have operational hints (LV2). Cleared to zero.

ASK (u vote God) projector zeroing method
Generally in the menu, and select Reset lamp time selected YES you can.

SHARP (sharp) projector zeroing method
Sharp video machine (PN200/300/500/C10) bulb zero time, press and hold standby reduced under the "volume" + "select", after the post;
Sharp 100S/00X/200/220 and other multimedia projector bulb zero method, standby press-, +, AUTOSYNC three keys, after power-on;
300S, 300X is press ENTER on your remote, down arrow, left arrow, and then press the
ON power on (without positive real)
SharpDLP projector zeroing: standby press "right" + "down" + "enter" + "power" to
Sharp 200/220, projector bulb zero method, standby press-, +, AUTOSYNC three keys, after power-on;
CN450SCN450XCN500X zeroing method: in the standby state (do not post), press the projector; INPUTENTERUNDOON3 seconds over his own will power on the system. If you display; bulb 100% indicated to zero;
AN100SAN100XAN120S and hold (standby state) projector + and AUTOSYNC, press on the projector ON and-button if the display shows light gun has LAMP0000H reset
SHARPNV21 series zero: no electricity, according to the direction of right, bottom, OK, continue to hold down for 5 seconds after receiving electricity;
Sharp XR11 press the power key and the down arrow key and OK

CTX projector zeroing method
In menu choose Reset lamp time
Moreover the menu also has a "close warning" light bulb, the option is set to off (off) won't tip the lamp time

Philips (Philips) projector zeroing method
Power, menu, press the time bar lamp projectors on the OK button for 3 seconds

Hitachi (Hitachi) projector zeroing method
Power on, press the RESET key for 3 seconds, the time of dialogue, select 0 on OK
Hitachi HS800/CP-210 zero out of small machine is: put the menu moves to the time bar, press and hold 3 seconds; youjian

Morningstar projector zeroing method

Morningstar is sharp and lixun OEM. You can reference lixun and sharp.
Morningstar TL460 projector reset the lamp timer method
Hold down the projector's + and AUTOSYNC button press the projector ON and on the UNDC-button
Then, start screen displays 0000
Morningstar CX-525 lamp timer reset method
In the menu of the lamp reset option selected YES you can.
Morningstar CX-500/505/600/610/615 models: turn on, no signal state then press, top, left, right, enter the menu, and the lamp clear, color temperature, etc., are all in it
Morningstar CX-59/69/550/650590/690 models are SHARP foundry, cleared and into the maintenance menu to see the corresponding models; SHARP

Morningstar CX490/500/600/610 zeroing: power on, power source, to enter the menu, press the arrow keys to enter the input message status, use the "+" key to reset the time, to confirm exit. (Unconfirmed)

EIKI (love Qi) projector zeroing method
Love, projector from SANYO foundry, zero method reference Sanyo
All in the menu, there is a LAMP bulb typefaces this bar, all is YES

3M projector zeroing method
3M projector by Hitachi and Fujitsu foundry, zero methods vary, in short the operator panel has a RESET button to clear reference to the Hitachi method (power on, press the RESET key in 3 seconds, the time of dialogue, select 0 on OK). Otherwise, try the Fujitsu zero method.
MP8030 zeroing method
Is press the TIMER button for two seconds, a dialog box that appears, select zero. (Unauthenticated)
3M8746 zeroing: long press RESET the lamp time is displayed, press the left and right keys to move the cursor to 0000, and press the left key so that the menu disappears, OK!

Canon (Canon) projector zeroing method
Canon launches product less than OEM for Sanyo, Sanyo zero method reference
All in the menu, there is a LAMP bulb typefaces this bar, all is YES;

PROXIMA (Po Shima) projector zeroing method
PROXIMA (Po Shima) projector for Sanyo manufacturing, you can reference the Sanyo's clear method.
All in the menu, there is a LAMP (bulb) typefaces this bar, all is YES;

BENQ (BenQ) projector zeroing method
BenQ projectors cleared (validated)
Power on, press the EXIT key for a few seconds, when the dialog bar appears, press the left or right will zero out .8 and 6 and 7 series Governor so

Epson (Epson) projector zeroing method
Old models: only apply frame has resistance machines: frame Department has a low resistance (zero by), as long as the machine corresponds to a four small pin shorted out, this is annoying, and short circuit could not good but also may cause other problems.
New models in the menu to reset the lamp time on it.
Emp-5600 lines appear live help key on the first dialog box, choose OK.
EMP-3300: after the lamp mounted guard is locked, pressing the Menu of the projector and Sync key again will power on, five seconds and then release the two keys, Menu and Sync, reboot.
EMP-3500: after the lamp mounted guard is locked, pressing the projector on Tracking + and Sync + key to power on, five seconds and then release Tracking + and Sync + 2 keys, power back up.
Epson 730 zero method of projector:
Help key and trapezoid correction ' minus ' keys at the same time, the maintenance menu, trapezoid correction key and press the confirm key can be cleared, there must be a signal to operation
EPSON EMP-S1 bulb zero: go to menu select Reset, and then select the lamp count is reset, press the OK button and choose YES to