Weak current College】 【daily tips on how to use the projector carrying case --- Power By】 【China power house network.

Projector carrying case can be said that the projector is inseparable from daily use part of mobile projector when carrying case became a faithful partner of projector, portable bag not only to provide portable projector while the projector in the move process provides earthquake, ruggedized, etc, but often a lot of users will ignore the role of the carrying case, which is not a good many projectors play a protective role. For example we have seen users of NEC VT47 projector feet knock off, in fact simply because the user itself didn't notice good projector carrying case for use and, in the following we will explain through actual legend to change with the correct use of the package and its role.

First, open the projector package, drawings in the carrying bag for BenQ projectors backpack, the wall can be seen carrying case with foam cushioning layer, this is to raise the projector to bring shock in the process, such as BenQ carrying bag is directly change stitching backpack around, and some carrying case is designed with tank type, you can directly check out into the projector into carrying case.

2. when placed into the projector, you also need to put the projector fixed belt buckle, and at the same time projection lens cap must also be installed, and note that the projector's lens should be like, and must not go down vertically, so that the carriage process is very easy to knock out the lens while the projector needs attention expansion bracket fully retracted fuselage, so clean to avoid moving to head off in brackets, such as NEC and Panasonic models which support most of the design on the sides, and both are made from plastics design, very easy to move the process inadvertently knocked off, many users didn't notice directly to the camera to display the results of many of them are the bracket to knock off.

Third, the length of the shoulder belt carrying case need to be adjusted to the best, bearing in mind the skid blocks and shoulders close, you can increase the friction to prevent falls. At the same time can also reduce the pressure.

4. at the same time you need to check the shoulder straps and backpack of key buckle is close, there is no loss of

5. If you want the projector mount portable package send, please be sure to place it inside the box of the cushion enough cushioning material to prevent damage to the projector mount portable package as a package send may damage the worst projector. Also note that the projector is placed into the carrying case is the need to ensure that the projector is cooling completed!