【 Weak current College 】 lighting system debugging

For complex traditional stage lighting system, as it involves people and stage lighting as well as different needs in lighting design, so that debugging including a light tone, color, color temperature, brightness, projection area, dimming platform scenes, sequences of editing, and other aspects of content that is not a general utility engineering can simple debugging, like sound system, also need to have a large number of serious debugging to complete, or as previously mentioned, for traditional complex lighting systems design, construction and debugging of the best in professional institutes and professional performance unit with the help of the General sound engineering light system debugging, due to both the performance of requirements not strictly professional venues, so debugging involves technical indicators, relatively light system debugging not too complicated, however, there are technical requirements higher than conventional stage lighting specifications, relatively light system debugging not too complicated, however, there are technical requirements higher than conventional stage lighting technology, that is: in practical audio engineering involves many computer lamp, so engineers should earnestly study
First of all, you should carefully check each device individually shipped condition, because the internal computer lamp control system and comparison of precision mechanical parts, lighting power power, protection measures are also relatively complete, so if for transportation or installation causes internal control unit or lamp bulb injury, computer generally does not work properly, but want to complex lighting system to confirm that the failed computer lamp failure cause more trouble, so try to connect to the system or install the previously separate check the status of each device, it can do is check the lamps and the purpose of checking the console.
Second, we must correct the settings for lamps.
It can be said that all PC lights to the correct settings to work correctly, so if you want to unit and system in normal state, the correct setting is very important, set includes lighting control, power supply, campaign coverage, lamps in the system address, control line terminal processing, in which the lamp in the system location setting in project frequent errors, it is set to the code of conduct, that is, when the dip switch on the lamp must be in strict accordance with product instructions provided in the table, not in haste.
In addition to lighting control equipment.
Maximum PC lamp is, needs to have appropriate, set the correct control device to control the operation, if the console improper selection, set unreasonable or fails, the computer lights not working correctly, or even working, especially complex lighting system control device in the light of work plays an important role and, therefore, must be set on the device, set includes control forms, control signal output mode, the lamp of the type and quantity of the contents of the control program software.
Finally it should be noted that: in the above steps are completed, you need to check it again controller actions and the actions of computer lights are the same whether normal lamps of post, there are: it is necessary to pay attention to lighting and audio systems with each other without interference, if so, record the amount of time to produce stem and specific device model in order to facilitate future settlement.
D video system debugging
In General, sound engineering, video equipment and the complexity are not too big, so debug looks relatively simple.
First of all to set the display device
Because the installation constraints, it is often difficult to accurately in accordance with the requirements of the product on the distance to install, so when you debug the project needs to make adjustments to the display device and the settings that you can make the camera, edit the device debugging an accurate reference, General Engineering, display equipment adjustments mainly the adjustment of the projector, high-speed connection including: image distortion, high-speed, etc., is displayed for a multimedia have to row frequency and field frequency and field frequency adjustment, special note: the image distortion adjustment, if environmental conditions do not have, we must make full use of the projector's "inclined to vote for" feature to compensate, for example: RCF's 4001 projector has shown in the figure below:
Secondly to camera, editing and distribution device debugging.
Because the camera device in different working conditions and working environment, the image quality will have a greater difference, so after the completion of the work should be on camera devices with adjustments, adjustments must reference the same display devices in the same scene under different light, adjustment of content including: head's scope of activities and control, the lens focus adjustment, white balance, sensitivity adjustment and the adjustment of the output format, and so on, edit, and assign device debug key including, adjust the signal input and output format, select the character format, etc.