【 Weak current College 】 YAMAHAREV100 effects using description

In view of the many places in the effects used YAMAHAREV100, are the effects of simple instructions to everyone!
Simple instructions for use YAMAHA---REV100
1. correct installation and connection YAMAHA---REV100. If use Mono to only the left channel.
INPUTLEVEL: input level knob, adjust this knob enables peak led Typ occasionally flashing. Always shining represents the voice signal is too strong, it will be clipped, too weak tone drop occurs again, so adjust the appropriate level input is used to good effect with a first step, is also a very important step.
MIXBALANCE: effect of hybrid knob to adjust the effect of sound and the ratio of the original sound.
PROGRAM: used to select a different program, edit the program storage.
Second, change effects: YAMAHA? REV100 99 effect programs, use the up and down cursor keys to select.
Reverb
Program name type description
01Vocalrev1 voice for vocal reverb
02Vocalrev2 Hall 3, the early extension of the program, the reverberation time is short
03Vocalrev3 voice
04Roomambience1 plate 04-08, the effect applies to drum and percussion, drum can be scoped to the entire group or a drum sound
05Roomambience2 plate
06Roomambience3 plate
07Woodbooth1 voice
08Woodbooth2 voice
09Acousticpianoplate for piano reverb
10Clubpiano Hall reverb for piano
11Boomingkick1 Hall used to heave the reverb, emphasized the low frequency
12Boomingkick2 room used to heave the reverb, emphasized the low frequency
13Loudsnare room for snare reverb
14Acoustecsteelguitar1 plate steel-string acoustic guitar reverb
15Acoustecsteelguitar2 plate steel-string acoustic guitar reverb
16Stringplate plate of the reverberation strings
17Acoustecgutguitar1 vocal chord acoustic guitar reverb nylon
18Acoustecgutguitar2 vocal chord acoustic guitar reverb nylon
19Btassroom1 reverberation room brass
20Btassroom reverberation room brass
Stereo reverb
Program name type description
21Largehall1 Hall Stage than hall of reverberation brighter
22Largehall2 Hall Stage than hall of reverberation brighter
23Stage1 Hall Stage than hall of reverberation brighter
24Stage2 Hall Stage than hall of reverberation brighter
25Chamger1 voice modeling large rooms, high-reverberation
26Chamger2 Hall simulation room, high-reverberation
27Church1 room simulation of large rooms, high-reverberation
28Church2 Hall simulation room, high-reverberation
29Oldgunnel Hall simulation long channel in reverberant, old dark, new bright
30Newtunnel voice
31Largeroom1 room room reverberation, 32 more than 31 low frequency
32Largeroom2 room
33Slidereverb room reverberation of sound and image in the right
34Hugeroom1 room is bigger than the room reverberation stronger reverb
35Hugeroom2 room is bigger than the room reverberation stronger reverb
36Bathroom plate short stereo reverb
37Stringensemble dishes for string of great reverberation
38Rudereverb1 voice rough reverb
39Rudereverb2 voice rough reverb
The voice is used for the original piano 40Comcertgrandpiano reverberation
Door reverb
Program name type description
41Smallambience1 Hall Room reflection reverberation, 42-frequency less than 41
42Smallambience2 Hall
43Tightpoom1 room is bigger than the above two more small reverberation
44Tightpoom Hall effect than the above two smaller reverb
45Gatereverb1 Plate reverb various doors
46Gatereverb2 vocal variety of door reverb
47Gatereverb3 Hall reverb various doors
48Gatereverb4 Hall reverb various doors
49Stoneroom room stone room reverb
50Bigcurve vocal longest door reverb
Delay
Program name description
51Analogdelay1 soft delay
52Pingpongdelay audio-visual delay variation around
53Eighthnotetriplet like eight minutes a delay of three linked notes
54Karaoke for karaoke echo effect
55Shortdelaydoubler a short delay
56StereOlongdelay left and right channels of a stereo delay with long
57Sgereomediumdelay left and right channels length stereo delay
58Stereolongdelay left and right channels with long and short latency
59Monolongdelay mono output of repeat delay
60Monoshortdelay mono output of repeat delay
Delay/reverb
Program name type description
61Electricpiano delay + Hall is often used for piano
62Stringpad delay Hall is often used for background music
63Synth delay voice for string background
64Vocal164, 65 is a short delay long reverberation, apply to the human voice
65Vocal2 delay Hall 64, 65 is a short delay long reverberation, apply to the human voice
66Vocal3 delay room 66 is stressed short reverb delay
There is a small delay plate 67Btinghtvocal delay-reverb
68Chorus delay + half half the plate reverb, delay
69Drumkit1 delay + room for drum and percussion reverberation
70Drumkit2 delay for drum and percussion on the plate of the reverberation
Reverb/modulation
Program name type description
71Softflange1 Hall + erratic this effect is a combination of reverb and small pitch changes in stocks, commonly used in the synthesis of tone color of background music
72Softflange2 Hall + erratic this effect is a combination of reverb and small pitch changes in stocks, commonly used in the synthesis of tone color of background music
73Amgienceflange1 room erratic short reverb plus erratic
74Amgienceflange2 room erratic short reverb plus erratic
75Softreverbflange room erratic short reverb plus pitch change more erratic
76Organcabinet1 plate sliding effect for organ of erratic
77Organcabinet2 room Symphony for organ of erratic results
78Symphonicreverb1 Hall + Symphony to reverb effect of exquisite
79Symphonicreverb2 voice + Symphony to reverb effect of exquisite
80Flangeroom1 room + s calling for drum and percussion with special effects
81Flangeroom2 room + s calling for drum and percussion with special effects
82Rollingflange1 dish + s calling for drum and percussion with special effects
83Rollingflange2 dish + s calling for drum and percussion with special effects
84Bigflange voice wafting Jet effect
85Chorusrererb1 Hall + 86 85, chorus is ordinary reverb + chorus, use is broad as for piano
86Chorusreverb2 dish + chorus
87Chorusreverb3 Hall + and sing
88Chorusreverb4 voice + chorus
89Tremoloreverb1 Hall + tremolo tremolo + reverb effect of various changes
90Tremoloreverb2 Hall tremolo tremolo + reverb effect of various changes
91Tremoloreverb3 dish + tremolo tremolo + reverb effect of various changes
92Tremoloreverb4 voice + tremolo tremolo + reverb effect of various changes
93Tremoloreverb5 voice + tremolo tremolo + reverb effect of various changes
94Tremoloreverb6 Hall + tremolo tremolo + reverb effect of various changes
95Tremoloreverb7 Hall + tremolo tremolo + reverb effect of various changes
96Ambientslowpan1 Hall + tremolo around sound like change and short reverb
97Ambientslowpan2 room + tremolo around sound like change and short reverb
98Sequencepan1 room + tremolo speed according to the music of sound and image changes effect
99Sequencepan2 room + tremolo speed according to the music of sound and image changes effect
Edit mode (EditMode)
REV100 each effect has multiple parameters, three main parameters through the knob on the control panel.
Edit effects program
1. press the up or down cursor keys until the screen display to be edited.
2. Select a button, such as DELAY (latency), DECAY (feedback) and LEVEL (level).
3. rotate the knob to change the screen display of parameter values, when the value is the same as with preset values, knob led lightened.
4. listen for adjustment
The following table lists the available knob editing of parameter values:
Effect type DELAYDECAYLEVEL
01-20 reverb early latency (MS) reverberation time (× 0.1 milliseconds) effect level
21-40 of stereo reverb early latency (MS) reverberation time (× 0.1 milliseconds) effect level
41-50 doors early reverb delay (in milliseconds) noise gate-level effect level
51-60 of latency delay time (× 10 milliseconds) feedback level effect level
61-70 of delay/reverb delay time (× 10 milliseconds) feedback-reverb level
71-99 reverb/modulation modulation depth of the modulation speed reverb level
Stored procedure results
1, press theSTORE key on-screen program number flashes.
2. Press STORE key storage, you cannot select a different program, storage space for changes.
Initialize REV100
You can add 1-99 results program (one or both) to restore the original factory settings.
1. press and hold the power key and open the STORE.
2. with the cursor keys to select the program you want to initialize, "--" means that all programs will be initialized.
3. press the STORE button.