【 Weak current College 】 effects used to invigorate the-9--Power By 【 China power house network 】

■ If you do not try it for yourself, nobody would believe there will be so "cool" effect. Use a centre frequency of about 3.5 kHz band-pass filter to handle the human voice. In a very narrow frequency range (for example 3 to 4 kHz) with the voice of the envelope on filter resonance frequency modulation. And then, on the direct sound and the ratio of the effect sound for minor adjustments — to remove the effect sound differences but cannot be clearly felt the effects of the present. This filter automatically in the frequency range of the human voice to the modem, and the human voice and delicate and lively. ■ Distortion effect only applies to the guitar, this sentence on? the answer is wrong. Whether you believe it or not, distortion effects can enhance the strength and breadth of the drum. The sound of the drum head strong, but evanescent. then joined a lot of obvious characteristics of overtone ingredients, winning the drum. ■ The mixer an auxiliary bus to voice synthesizer carrier input. Another secondary bus output to voice synthesizer modulation input. So any way on the receipt of a mixer of the signal can be on another road signal modulation, which produces some unexpected effects — for example: percussion modulation bass, guitar, keyboard, etc. ■ If you are using the pedal-distortion effects, must pay attention to timbre synthesis of key time period is reduced to a minimum, because it combined exaggeration to performance of the distortion of compression properties. ■ If you are using reverb effect is not very satisfactory. Then you can consider a parallel on different types of effects (such as room reverberation and parallel plate reverb together). The second parameter of the effect as far as possible, and the first effect is the same as the parameter tune into – tune into approximation algorithm rules, same delay time, and so on. But since the second effect, is after all a different effect type, so after its processing of the sound is able and the first effects processing voice draw to get more perfect sound effects. ■ When you use an envelope-modulation of the filter on a signal (especially bass signal) for processing, be sure to signal into two parts: part a filter for processing. Sent directly to another part of the tune. After filter processed sound becomes the "narrow" and sent directly to direct sound mixing sound mixer, you can keep the low frequency and high frequency sounds, the sound becomes full. ■ Try a considered entirely the wrong way, maybe you will get good sound effects. ■ Often have such a situation occurs: when you like a mad scientist constantly rotating effects knob or random adjustment parameters, you will suddenly get a very good effect. And when you want to use the recorder, but how can get the best start. Therefore, a very good habit is before you start mixing recorder ready., so that you can start recording at any time. ■ Try different connections to achieve different effects. For example the volume pedals and delay unit. When the delay on the volume pedal front. placed in the rear, volume pedal can simultaneously control directly to the signal and the volume size delay signals; when the volume pedal; plate placed in front of the time delay unit. volume pedal can only control and direct access to the signals of the volume size, so you can highlight the delay after the voice.